Reggiani YORI SUPERFICIE Installations- Und Montageanweisungen Seite 8

YORI SUPERFICIE | ENG |
www.reggiani.net
specifi cations. Bear in mind that each dri-
ver absorbs 2.5 mA.
In phase-cut dimming, a trailing-edge
dimmer using Mos-Fet technology must
be selected and it must be appropriate for
the number of luminaires connected (ma-
ximum power = no. of luminaires x 10W)
and the minimum adjustment power (3W).
The adjustment range is usually betwe-
en 30 % and 100 % of the LED's nominal
power.
5 % to 100 % adjustment is guaranteed for
luminaires with a DALI dimming system.
08
INSTALLATION/REPLACE-
MENT OF REFLECTORS AND
LIGHT SOURCES
Turn the electricity off at
the mains and follow the
instructions below.
1) Remove the IOS safety refl ector
by turning it anti-clockwise.
2) Re-engage the IOS refl ector correctly
by turning it clockwise.
There is no provision for replacing the LED
on LED projectors. If any malfunction oc-
curs, contact Reggiani Spa Illuminazione
to replace the luminare.
Do not touch the LED; in particular, avoid
the use of pointed tools which could other-
wise damage internal connections.