Troubleshooting - Husqvarna PP 70 Montage- Und Bedienungsanweisung

Explanation of the status indication
lamps
The status indication lamps help you to do

troubleshooting.

The light is on.
The light is off.
The light is constant.
Product display
Control panel
10
Troubleshooting
1
3
1/3
The light flashes quickly.
The light flashes slowly.
The light goes from the left side to the right
side and then to the left side again.
The light goes from the left to the right side.
1 phase is on.
3 phases are on.
1 or 3 phases are on.
Status
There is no power.
Function test of LED
at connection of pow-
er. (< 3 s)
Step
Do a check of the
power supply.
Do a check of the
machine stop button.
To do a
Refer to
check of the machine
stop button on page
6 .
1244 - 002 -