Initial Operation - OWIM Z31913 Bedienungs- Und Sicherheitshinweise

12 GB
104500_Mueckenstecker_Content_PL_HU_SI.indd 12

Initial Operation

Plug the appliance into a mains power socket.
Select required function at function selector
switch :
2
- Position "I / ON": the LEDs illuminate and the
high-voltage grille
attracted and killed as soon as they touch the
high-voltage mesh
- Position II / Twilight: The appliance automatically
switches itself on at twilight (LEDs illuminate and
high-voltage mesh
becomes light again, the appliance automatically
switches itself off.
- Position "O / OFF": The appliance is switched off.
If the appliance is not going to be used for a long
time, move the function selection switch
position "O" and disconnect the plug from the
power socket.
is active. The insects are
1
.
1
is active). As soon as it
1
to
2
05.11.14 11:52