Technical Data - Vieweg 990115 Bedienungsanleitung

Operating Manual Bubble Detector
USB-Data-Converter für den Anschluss des Sensors an den USB-Port eines Computers

5 Technical Data

Measuring method
Bubble sensitivity
Measuring cycle
Response time
Holding time
Operating temperature +5 °C to +60 °C
Storage temperature
Materials
Dimensions of tube
Requirements for tube Parameter
Ultrasound
Bubbles larger than 1/3 of internal tube diameter are detec-
ted
200 μs
Can be adjusted, minimum < 0.5 ms
Can be set in order to increase the duration of the output signal.
-20 °C to +70 °C
Housing and Cover: Plastics / POM;
Measuring cell: Plastics / PMMA;
Potting: PUR; (other materials on request)
Model Outer diameter
The selection of the right sensor depends on the tube pro-
perties. If possible, provide us with a tube sample!
A up to 6 mm
B up to 8 mm
C up to 10 mm
Property
Material Plastics, e.g. PVC, PE, Silicone, PUR
Other materials on request or after test only
Special features Tube must be smooth on outside, no fabric
tube
Elasticity Tube must be able to adjust flexibly
19
VIEWEG
EN