Accessories; Ice Tray; Plastic Scraper - INSIDO MID W1-10 Bedienungsanleitung

• When the appliance is first switched on, allow it to run for 24 hours in order to reach
operating temperature. During this time, do not open the door and do not keep a large
quantity of food inside.
• Unplug your appliance during a power cut to prevent damage to the compressor. Once
power is restored, delay plugging in your appliance for 5 to 10 minutes. This will help
prevent damage to the appliance's components.
• Your appliance is designed to operate in the ambient temperature ranges stated in
the standards, according to the climate class stated in the information label. It is not
recommended that your fridge is operated in the environments which are outside of the
stated temperature ranges. This will reduce the cooling efficiency of the appliance.
• This appliance is designed for use at an ambient temperature within the 16°C - 32°C
range.

Accessories

Ice tray

• Fill the ice tray with water and place in freezer compartment.
• After the water completely turned into ice, you can twist the tray as shown below to get
the ice cube.

Plastic scraper

After a period of time frost will build up in certain areas in the freezer compartment.
The frost accumulated in the freezer should be removed periodically. Use the
plastic scraper provided if necessary. Do not use sharp metal objects for this
operation. They could puncture the refrigerator circuit and cause irreparable
damage to the unit.
All written and visual descriptions in the accessories may vary according to
the appliance model.
Climate class
T
ST
N
SN
EN - 25 -
Ambient temperature (
Between 16 and 43
Between 16 and 38
Between 16 and 32
Between 10 and 32
C)
o
C
o
C
o
C
o
C
o