Before Using The Appliance; General Warnings - INSIDO MID W1-10 Bedienungsanleitung

PART - 1.

BEFORE USING THE APPLIANCE

General warnings

WARNING: Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means
to accelerate the defrosting process, other than those rec-
ommended by the manufacturer.
WARNING: Do not use electrical appliances inside the food
storage compartments of the appliance, unless they are of
the type recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: In order to avoid any hazards resulting from the
instability of the appliance, it must be fixed in accordance
with the following instructions:
WARNING: When positioning the appliance, ensure the
supply cord is not trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets
or portable power supplies at the rear of the appliance.
Warning; Risk of fire / flammable materials
(Symbol ISO 7010 W021)
• If your appliance uses R600a as a refrigerant (this
information will be provided on the label of the cooler) you
should take care during transportation and installation
to prevent the cooler elements from being damaged.
R600a is an environmentally friendly and natural gas,
but it is explosive. In the event of a leak due to damage
of the cooler elements, move your fridge away from
open flames or heat sources and ventilate the room
where the appliance is located for a few minutes.
• While carrying and positioning the fridge, do not damage
EN - 18 -