Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FI casco+bauletto
3-12-2007
ENGLISH
•PEG PEREGO® thanks you for choosing this product
• Read this instruction manual carefully to become
familiar with model use and proper usage. Store the
manual for future reference.
• Our products conform to the safety requirements
provided by the EEC Council and the U.S. Consumer
Toy Safety Specification and are approved by TÜV
and I.I.S.G. Istituto Italiano Sicurezza Giocattoli.
Peg Perego S.p.A. is an ISO 9001
certified company.
The certification offers clients and con-
sumers a guarantee of clearness and
trust in how the company operates.
• Peg Perego may make changes to the models
described herein without prior notice for technical
or corporate reasons.
Years 2-8
CUSTOMER SERVICE
PEG PEREGO offers an after-sales service for any
repairs or replacements and sale of original replace-
ment parts directly or through a network of autho-
rized service centres. To contact the service centres
see the back cover of this instruction manual.
Peg Perego is at the consumer's service, meeting
every need in the best way possible. This is why our
customers' opinions are so important and valuable
to us. We would be very grateful if you would kindly
fill in the CUSTOMER SATISFACTION
QUESTIONNAIRE after using one of our products.
You will find the questionnaire on the Internet at
"www.pegperego.com" .
Please note any observations or suggestions you
may have on the questionnaire.
SAFETY REGULATIONS
The helmet is intended for small children when
using a bike or during other activities where there
are known risks of head injury and foreseeable
strangulation.
1 • The helmet must be regulated to fit the user.
The straps must not cover the ears.
2 • The buckle must not be near the jaw bone and
the straps and buckles together must be regu-
lated so they are comfortably snug.
3 • The helmet only offers protection if positioned
correctly.
4 • The helmet must fit to protect the forehead
and not be pushed too far back on the head.
5 • Thanks to the anti-strangulation device, the hel-
met unhooks when necessary.
• Although the helmet has been designed to unho-
ok to avoid strangulation, we recommend remo-
8:53
Pagina 5
ving it before climbing.
• A helmet can not protect against injury and can
not substitute adequate child supervision.
• A helmet which sustains violent impact must be
destroyed and thrown away.
• Do not remove helmet components.
• The helmet material is subject to atmospheric
changes: do not expose to sun rays or heat sour-
ces.
• Do not treat with hydrocarbons, paints, decals or
other added foreign materials.
• Do not clean with solvents, benzines or other com-
bustible substances in order to prevent damages
to the visor, plastic components and internal
lining.
• The company shall not be held liable if the pro-
duct's original components are tampered with
and/or altered.
WARNING: ASSEMBLY PROCEDURES MUST BE
CARRIED OUT BY ADULTS ONLY.
The top case can be placed in two positions.
6 • Remove the screw located on the vehicle's par-
cel rack. Place the top case in the desired posi-
tion and insert the screw from the inside.
7 • Proceed by tightening the screw and closing
the top case.
• Do not treat with hydrocarbons, paints, decals or
other added foreign materials.
• Do not clean with solvents, benzines or other com-
bustible substances in order to prevent damages
to plastic components.
• The top case has a maximum capacity of 3 kg. Do
not overload exceeding the manufacture's recom-
mended load amount.
• The company shall not be held liable if the pro-
duct's original components are tampered with
and/or altered.
MAINTENANCE AND CARE
TOP CASE ASSEMBLY
MAINTENANCE AND CARE
Werbung
Inhaltsverzeichnis
