ABB 6951 EB-500 Betriebsanleitung Seite 29

GB
Important Information
ATTENTION
Work on the 230 V power system may only be performed
by qualified electricians. DIN-VDE standards and rules,
as well as those contained in the EIB manual of the
ZVEI/ZVEH, must be adhered to.
The manufacturer's database available from ABB is
continuously updated and contains the latest applications.
Please refer to the Technical Manual for the relevant
descriptions. Should you not yet have the database and/or
the Technical Manual, you can request these free of
charge.
Version 2.1 and onwards of the device are programmed
with the ETS or with the ABB Powernet EIB Controller
(6910).
NOTE
When wiring the ABB Powernet EIB switch actuator 6951
EB-500 (hereinafter referred to as built-in device 6951 EB-
500) with incandescent lamps, the instructions of the lamp/
electronic control gear manufacturer regarding making