Internet Radio Quick Start Guide; What You Need Before You Can Use Your Internet Radio - HDigit Sense Bedienungsanleitung

English

Internet Radio Quick start Guide

What you need before you can use your Internet Radio

Before you use your Internet Radio, you need the following:
LAN Settings:
• Make sure the internet facility is ready and the network settings are available for LAN (ADSL or Cable Modems is highly recommended).
• To find the Radio's LAN MAC address, Please follow:
Menu Screen→ Settings → Network settings → Current Settings → Wired MAC
Wireless Settings:
• A broadband Internet connection.
• A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
• If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption, then you
need to know the WEP or WPA code so you can get the Internet Radio to communicate with the network.
• If your wireless network is configured by reliable stations, you will need to enter the Radio's MAC address into your wireless access point. To
find the Radio's MAC address, please use menu items as follows:
Menu Screen → Settings → Network settings → Current Settings → WLAN MAC
• To enter the MAC address into your wireless access point, you must read the instructions supplied by the wireless access point.
Before you continue, make sure that your wireless access point is powered up and connected to your broadband Internet, or your LAN cable
is setting well. To get this part of the system working, reading the instructions supplied by the wireless access point and LAN connection is
highly recommended!
6