Basic Cleaning; Start-Up Operation - Lentz 74108/YT-2001A Bedienungsanleitung

6. Instructions
1 – Start control
2 – Stopknop
3 – Bruiningsregelaar
7. Technical Data
Model:
Nominal voltage:
Protection class:
Nominal power:
Checking the equipment
1. Remove the toaster from the
package.
2. Check whether the delivery is
complete.
3. Check whether the toaster or the
components show damages. If this
is the case, do not use the toaster.
Contact at the service address of
the manufacturer mentioned on the
Guarantee card.

Basic cleaning

1. Remove the packaging material and
the complete protection film.
2. Clean all the parts of the toaster as
74108 Bedienungsanleitung.indd 13
1
3
YT-2001A
220-240V, 50/60 HZ
I
750 watt
described in the chapter "cleaning"
before the first use.
Mount the toaster
1. Unwind the power cable from the
cable winding on the lower side of the
toaster.
2. Lead the power cable through the
cable slot.
3. Place the toaster on a flat, stable
and heat resistant surface so that the
heat generated while using can be
removed.
4. Insert the power plug in a socket with
earthing contacts.
2
Start-up operation and use
PLEASE NOTE!
With the first use, it can lead to light
odour development.
• Take care of the sufficient ventilation,
e. g. by keeping the window open.

Start-up operation

Before the first start-up operation, the
toaster must be heated up without any
bread products in it in accordance
with point 1.
1. Take care that you do not fill in the
bread products.
2. Keep the browning regulator at the
highest level.
3. Press down the control key of the
toaster (see chapter "Application").
4. Repeat the process thrice after the
toaster has been switched off and has
cooled down at the moment.
You can now use the toaster.
EN - 13
05.04.19 12:04