Before The First Use - Domo DO710BL Gebrauchsanleitung

PARTS
1. Measuring cup
2. Lid
3. Lid sealing ring
4. Jar
5. Blade assembly
6. Blade sealing ring
7. Jug base
8. Motor unit
9. Speed knob
10. 3 function buttons: pulse, ice crushing, smoothie

BEFORE THE FIRST USE

· Take the appliance out of the packaging
· Disassemble the different parts of the appliance and clean all removable parts according to the
instructions described in the section 'Cleaning and maintenance'.
· Reassemble all parts when they are dry:
1. Position the seal on the blade assembly. Hold the jar upside down.
Screw the blade with sealing ring onto the jug. Secure the base of the
jug by screwing it tight in a clockwise direction. Turn over the jar so that
the base is at the bottom again.
2. Tighten the lid onto the jar by turning it clockwise.
3. Position the measuring cup in the lid and jug and screw it tight in a
clockwise direction.
4. Turn the pitcher clockwise on the motor block until you hear a click.
The blender is now ready for use.
USE
1. Make sure that the speed regulation button is at "0".
2. Put the plug in the outlet. The blue 3 function buttons light will flicker. Place the glass jug on the
motor unit. If it is positioned correctly, the function buttons light will be blue.
3. Fill the container with the desired ingredients. Make sure that you do not exceed the maximum
amount of 1.5 l.
4. Position the lid with measuring cup on the container. Turn the speed regulator to the desired speed.
5. Or use the function buttons. Set the speed control to the off position and press one of the function
buttons:
· Pulse: button for fast and gentle mixing. Keep it depressed for a few seconds. When you release
the button, the blender will stop working. You can repeat this a few times to reach the desired
consistency.
18
DO710BL
1
2
3
4
5
6
7
8
9
10