Using The Appliance - Redmond SkyCoffee RCM-M1509S-E Bedienungsanleitung

After transportation or storage at low temperatures allow the appliance to stay at room
temperature for at least 2 hours before using.
Wipe the housing with a moist cloth. Rinse the removable parts with warm water, let
dry properly before plugging in.
II. USING THE APPLIANCE
Device remote control via the Ready for Sky application
The Ready for Sky application allows you to control the device remotely in the nearest
zone from a smartphone or tablet.
1. Download the Ready for Sky application from App store or Google Play (depend-
ing on the device operation system) onto your smartphone or tablet.
For the minimum supported OS version, see the company's official website www.redmond.
company or the application description at the App Store and Google Play.
2. Start the Ready for Sky app, create an account, and follow the prompts appearing
on the screen.
3. To the standby mode press and hold down "Hour" button until three audible
signals are heard. indicator will light up on display.
After connection is made the indicator will light up constantly.
If within 10 seconds connection won't be made, the appliance will switch to the
standby mode.
4. To disable remote control press and hold the "Min" button until the longer sound
signal.
To provide a stable connection, your mobile device should be located no more than 15
meters away from the appliance.
Appliance control via the wireless network. Instruction on the R4S Gateway application
installation is available through the link: http://redmond.company/APP_manual_appgateway
If necessary, you can disable the device Bluetooth function. Press and hold down the
"Strength" button until the indicator flashes twice and an audible signal sounds.
When Bluetooth is disabled, the device cannot be synchronized. To enable the Bluetooth
function, press again and hold down the "Strength" button until the
flashes twice and an audible signal sounds.
To adjust the current time
1. Plug in the appliance. An audible signal will be heard, the default time value will
be displayed (12:00).
8
2. To change the time value press and hold down the "Delay brew" button. The hour
value on display will start flashing.
3. To set the hour value press HOUR, minute value – press MIN. Press and hold the
corresponding button to scroll through the digits. The hour value changes irrespective
of the minute value. After the maximum value is reached the adjustment starts again.
4. After setting is complete do not press the buttons on the panel for 5 seconds.
Settings will be saved automatically.
The default time value is displayed in 24-hour format. To switch the clock into 12-hour
format in the current time setting mode simultaneously press and hold "Hour" and "Min"
buttons. The current time value in 12-hour format and АМ or PM indicators will be displayed.
The REDMOND coffee maker SkyCoffee RCM-М1509S-E does not have non-volatile
memory, that's why in case of the temporary disconnection from the power supply it's
necessary to readjust the clock.
Time Delay
The time delay function allows setting the start time of making the drink.
1. To switch to the time delay setting mode to the standby mode, repress "Delay
brew". indicator will light up solid, the hour value on display will start flashing.
2. To set the hour value press HOUR, minute value – press MIN. Press and hold the
corresponding button to scroll through the digits. The hour value changes irrespective
of the minute value. After the maximum value is reached the adjustment starts again.
After 1 minute of idle time, the appliance will switch into the standby mode.
3. After the end of adjustment press "Start/Cancel". The Time Delay function will
start its operation.
During the operation of the function the current time value is displayed. To see the set
Time Delay value, press "Hour" or "Min".
4. After the end of the function operation the appliance will make three audible
signals, indicator will go out. The drink-making process will start.
5. To disable the Time Delay function repress "Start/Cancel". A long audible signal will
be heard, indicator will go out, the appliance will switch to the standby mode.
"Strength" function
indicator
This function allows to increase the intensity of the ready drink. The hot water is supplied
into the filter with coffee by 10 second periods with 10-second breaks during the
function operation. Thanks to that the flavour and aroma of the ready drink become
more intense.