Herunterladen Inhalt Inhalt Diese Seite drucken

Panasonic CF-AA6413A Bedienungsanleitung Seite 3

Inhaltsverzeichnis

Werbung

WARNING
Do Not Connect the AC Adaptor to a Power
Source Other Than a Standard Household AC
Outlet
Otherwise, a fire due to overheating may result.
Connecting to a DC/AC converter (inverter) may
damage the AC adaptor. On an airplane, only
connect the AC adaptor/charger to an AC outlet
specifically approved for such use.
Do Not Do Anything That May Damage the AC
Cord, the AC Plug, or the AC Adaptor
Do not damage or modify the cord, place it near
hot tools, bend, twist, or pull it forcefully, place
heavy objects on it, or bundle it tightly. Continu-
ing to use a damaged cord may result in fire,
short circuit, or electric shock.
Do Not Pull or Insert the AC Plug If Your
Hands Are Wet
Electric shock may result.
Clean Dust and Other Debris of the AC Plug Regularly
If dust or other debris accumulates on the plug,
humidity, etc. may cause a defect in the insula-
tion, which may result in a fire.
Pull the plug, and wipe it with a dry cloth.
Pull the plug if the computer is not being used
for a long period of time.
For Europe
Declaration of Conformity (DoC)
"Hereby, Panasonic declares that this AC Adaptor
is in compliance with the essential requirements
and other relevant provisions of EU Council Direc-
tives."
For your safety, please read the following text carefully.
This appliance is supplied with a molded three pin mains plug
for your safety and convenience.
A 3 ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 3 ampere
and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
of the fuse.
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a re-
placement cover is obtained. A replacement
fuse cover can be purchased from your local dealer.
If the fitted molded plug is unsuitable for the socket outlet in
your home then the fuse should be removed
and the plug cut off and disposed of safely.
or the BSI mark
on the body
A S A
Insert the AC Plug Completely
If the plug is not inserted completely, fire due to
overheating or electric shock may result.
Do not use a damaged plug or loose AC outlet.
Do Not Touch the Surface Continuously While
Using/Charging.
Burns may result.
Hold the Plug When Unplugging the AC Plug
Pulling on the cord may damage the cord, result-
ing in a fire or electric shock.
Do Not Move This Product While the AC Plug
Is Connected
The AC cord may be damaged, resulting in fire or
electric shock.
If the AC cord is damaged, unplug the AC
plug immediately.
Do Not Subject the AC Adaptor to Any Strong Impact
Using the AC adaptor after a strong impact such
as being dropped may result in electric shock,
short circuit, or fire.
Be Absolutely Sure To Use the AC Adaptor
With the Specified Product.
Use with any other product may result in a fire.
1
*
For information about the products for which
AC adaptor can be used, refer to the Operating
Instructions of your product or various sources.
Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
For U.K.
There is a danger of severe electrical shock if the cut off plug
is inserted into any 13-ampere socket.
How to replace the fuse
The location of the fuse differs according to the type of AC
mains plug (figures A and B).
Confirm the AC mains plug fitted and follow the instructions
below. Illustrations may differ from actual
AC mains plug.
Open the fuse cover with a screwdriver and replace the fuse
and close or attach the fuse cover.
Figure A
*1
Figure B
Fuse cover
18-E-0
8-E-1

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis