Dehydration Function - Klarstein 10034416 Handbuch

DEHYDRATION FUNCTION

1. After the washing is completed, put down the drain, clean the water inside the
barrel.
2. Place the dewatering basket on the pulsator and turn the dewatering basket
counterclockwise to snap into the groove of the pulsator.
3. Put the laundry in the dewatering basket and press it into the cover (to prevent
clothes from running out when it is dehydrated), cover the top cover, place the
program selector switch in the „dewatering" position, rotate the timer knob. Select
the dehydration time according to the type of clothing and begin to dehydrate.
If the time setting is too long, or halfway to stop, you can rotate the timer spin
counterclockwise to the „off" position, the dehydration basket will soon stop
spinning.
Note: clothes should be evenly flat, and covered with a pressure cover, to avoid the
uneven placement of the machine caused by shaking.
4. To be dehydrated to the time (dehydration end), open the cover, remove the cover,
and take out the clothes to dry.
5. Turn the dewatering basket clockwise and pull it out of the dewatering basket.
Note: When washing, please remove the basket, washing method see the manual.
The product of the dewatering basket can only be dehydrated to the clothes without
dripping, but can not dry the clothes.
EN
19