Connect IT CMF-3204-BK Benutzerhandbuch Seite 2

WALL MOUNT FOR FLAT SCREEN WALL MOUNT FOR FLAT SCREEN
Before putting this product into operation, please read carefully all the instructions, even if you are already familiar with using similar Before putting this product into operation, please read carefully all the instructions, even if you are already familiar with using similar
products. Use the product only as described in this manual. Keep this manual in case you need it for future reference. products. Use the product only as described in this manual. Keep this manual in case you need it for future reference.
The electronic version of this user manual can be downloaded on the website The electronic version of this user manual can be downloaded on the website
www.connectit-europe.com. www.connectit-europe.com.
EN EN
We recommend keeping the original packaging of the product, invoice and warranty certifi cate at least for the time the warranty is valid. We recommend keeping the original packaging of the product, invoice and warranty certifi cate at least for the time the warranty is valid.
When shipping the product, we recommend using the original packacking that the product was delivered in that will provide the best When shipping the product, we recommend using the original packacking that the product was delivered in that will provide the best
protection for it from being damaged during transport. protection for it from being damaged during transport.
1 1
Warning Warning
 The wall or the surface used for securing the mount must have suffi cient strength and maximum load to secure the weight of the  The wall or the surface used for securing the mount must have suffi cient strength and maximum load to secure the weight of the
mount, the screen and other accessories. mount, the screen and other accessories.
 When installing the screen, use an assistance of another person.  When installing the screen, use an assistance of another person.
 During the installation, tighten the screws properly, but make sure not to strip the threads. That could damage the installed screen or  During the installation, tighten the screws properly, but make sure not to strip the threads. That could damage the installed screen or
signifi cantly decrease the maximum load of the mount. signifi cantly decrease the maximum load of the mount.
 This wall mount is designed for indoor use only. Outdoor use may cause harm, damage to the mount or the installed screen.  This wall mount is designed for indoor use only. Outdoor use may cause harm, damage to the mount or the installed screen.
 Check the stability and safety of the mount at least every three months.  Check the stability and safety of the mount at least every three months.
2 2
Specifi cations Specifi cations
CMF-3204-BK CMF-3204-BK CMF-3204-BK
CMF-3204-BK CMF-3204-BK
38 mm 38 mm 36 mm 36 mm
185 mm 185 mm
32" 32"
75x75 75x75
100x100 100x100
MAX MAX
140 mm 140 mm
75 mm 75 mm
100 mm 100 mm
114 mm 114 mm
8kgx2 8kgx2 8kgx2
(17.6lbsx2) (17.6lbsx2) (17.6lbsx2)
RA TED RA TED TED
USER MANUAL USER MANUAL
+ - + -