Operation - SW Stahl PROFI Tools 20301L Bedienungsanleitung

20301L
Exploded Drawing
No. Description
1 Main Post
2 Side Leg,Fixed
3 Bolt,M12x80
4 Head Assembly
5 Lock Pin
6 Mounting Arms
7 Bolt,M12x50
8 Washer,Flat 12
9 Nut,Hex M12
10 Lock Washer, 12
11 Castor 3-1/2"
12 Washer,Flat 14
13 Retainer Ring
14 Front Leg
15 Side Leg,Caster
16 Name Plate
17 Wheel,Real 4 "
18 Bolt, M8X20
19 Lock Washer, 8
20 Nut M8

Operation

Before applying load
1. Lock mounting plate-rotating mechanism. Using a hoist,suspend the engine at a level
with the mounting plate.
2. With the mounting arms loose from the mounting plate(but not removed)bolt the
mounting arms to the rear of the engine using the bell housing mounting bolts (bolts
not supplied).
3. Make sure the engine is centered and straight on the mounting plate,then tighten the
mounting arms to the Engine,and the mounting arms to the mounting plate.
4. After making sure all connections are tight,slowly lower the hoist,transfering load to
the stand.
Remove an engine from the stand
1. Attach the hoist to the engine using a sling or similar device.
2. After the hoist and sling are secure to the engine,raise the hoist,taking the load off the
stand.
3. The mounting bolts can be removed freeing the stand from the engine.
QTY
1
1
3
1
1
4
4
6
6
7
2
2
2
1
1
1
2
8
8
8
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de
www.swstahl.de