Pipette; Manometer; Sample Test Tube - OEG 516 105 000 Bedienungsanleitung

OEG solar test set
For sucking up liquids easily.
Use this high-quality manometer to check the initial pressure of the
expansion vessel. It measures pressures between 0 and 6 bar. In heating
applications the initial pressure is usually default set to 1.5 bar, solar
systems are set between 2.5 and 3 bar. Every solar system requires an
individual adjustment of the settings. This device can however also be
used for checking the air pressure of car, motorbike and bicycle tyres.
Please ensure that the manometer is set to 0.5 bar before commissio-
ning. In case it is not, just press the metal button on the top left to reset
the manometer. The device is now ready for use. After the measurement,
please reset the manometer as described above.
For taking samples.
9

Pipette

Manometer

Sample test tube

GB
1
2
3