Service & Maintenance - Hammar MA1 EC Bedienungsanleitung

IN WATER PERFORMANCE
>10 cm pressure difference
=
cm
0
10
20
30
40
Automatic activation
SERVICE / MAINTENANCE
The Hammar Inflator needs no service or
maintenance. Just ensure that the inflator is
replaced after the five years expiry date or when
the single point indicator is red.
IN WATER PERFORMANCE
When a pressure difference of about 10 cm is obtained,
the inflator activates automatically. If you are wearing a
survival suit or other clothing that increases your buoyancy,
you might want to activate the lifejacket before the pressure
difference of about 10 cm is reached. Activate the inflator
manually by using the pull-tab. Make sure you know how
to reach the pull-tab on your lifejacket.
REARMING KIT
Ask your dealer for the rearming kit suitable for your lifejacket.
REPACKING
Before packing the lifejacket according to the manufacturer´s instruction, deflate the
lifejacket through the oral tube. Make sure that all residual air is pressed out from
the bladder.
REMEMBER THE ANNUAL SERVICE OF YOUR LIFEJACKET
All inflatable lifejackets need an annual service. Check the instructions from
your lifejacket manufacturer.
Scan the QR code or visit www.cmhammar.com/inflator for instructions, films
and support for the Hammar Hydrostatic Inflator.
Activation depth reached
Automatic activation
<10 cm pressure difference
= Activation depth not reached
Manual activation required
PULL TAB TO INFLATE
Manual activation
OK
X
Expiry Date
PULL TAB
3