Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4) Press the AFTERGLOW™ button once to cycle to ACCELERATOR setting. The AFTERGLOW™
Remote will vibrate twice to signal the change. In ACCELERATOR mode, AFTERGLOW™
lighting will activate when the AFTERGLOW™ Remote experiences strong acceleration.
5) Press the AFTERGLOW™ button once more. Three vibrations will signal the AFTERGLOW™
Remote is now on the OFF setting. Only the AFTERGLOW™ Remote's appropriate player
indicator light will glow.
6) To return to ON mode, press the AFTERGLOW™ button once more. One vibration will signal
the remote is now in ON mode.
7) Cycle through the three settings as often as you like and enjoy the AFTERGLOW™ in your
favorite mode!
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
Using the AFTERGLOW™ AW.2:
1) The AFTERGLOW™ AW.2 will work with the Nintendo Wii® videogame system as a
replacement for Nintendo's Nunchuk® controller. The AFTERGLOW™ AW.2 must be
connected to a Wii® remote to function.
2) Connect the AFTERGLOW™ AW.2 to a Wii® Remote via the expansion port at the bottom of
the Wii® Remote. Align the plug appropriately and press until a firm connection is made.
3) Pull the Wii® Remote and AFTERGLOW™ AW.2 apart to uncoil the wire from the spool within
the AW.2. Do not pull excessively after the wire is fully extended.
4) Play Wii® games that support Nunchuk controllers. The AW.2 supports all functionality
found in Nintendo Nunchuk controllers.
5) After play is finished, detach the AW.2 plug from the remote by squeezing the clips on each
side of the connector plug while gently pulling the plug from the remote's expansion port.
POWER
HOME
A
1
2
1
2
3
4
Changing AFTERGLOW™ Modes:
1) The AFTERGLOW™ AW.2 features three (3) modes of lighting effects: "ON", "ACCELERATOR",
and "OFF." The AW.2 must be connected to a Wii® remote synced to a Wii® console while the
console is powered on to function.
2) The AFTERGLOW™ button on the AW.2 is located in the mid-section of the controller body,
on the right hand side.
3) The AFTERGLOW™ AW.2's default setting is "ON."
4) Press the AFTERGLOW™ button once to change to "ACCELERATOR" mode. Lighting occurs
in this mode when the AW.2 detects movement while in play.
5) Press the AFTERGLOW™ button once more to change to "OFF" mode. No lighting occurs in
this mode.
6) Press the AFTERGLOW™ button once more to return to "ON" mode.
7) Cycle through the three settings as often as you like and enjoy the AFTERGLOW™ in your
favorite mode!
*please keep this information for future reference
1840 East 27th Street
Vernon, CA 90058 USA
For technical questions please visit
www.pdp.com or call: 1-800-331-3844 (USA ONLY)
© 2010 Performance Designed Products LLC. All rights reserved. PDP and AFTERGLOW are trademarks of Performance Designed
Products LLC. Wii is a registered trademark of Nintendo of America, Inc. This product is not designed, manufactured, sponsored or
endorsed by Nintendo.
ATTENTION - Utilisez toujours la dragonne – Les jeux vidéo pour Wii avec la télécommande
AFTERGLOWMC peuvent faire l'objet de mouvements rapides et puissants. Veuillez toujours
utiliser la dragonne fournie pour éviter que la télécommande AFTERGLOWMC ne vous
échappe, ce qui pourrait l'endommager, ainsi que les objets environnants ou blesser des
Merci d'acheter d'avoir acheter la télécommande AFTERGLOW
Contenu :
1 télécommande AFTERGLOWMC pour Wii
1 dragonne pour télécommande AFTERGLOW
1 AFTERGLOW
MC
AW.2 pour Wii
1 manuel
Utilisation de la télécommande AFTERGLOW
1) La télécommande AFTERGLOW
MC
est conçue pour être utilisée avec le système de jeux
vidéo Nintendo Wii
MD
. La télécommande AFTERGLOW
console Nintendo Wii pour fonctionner.
CAUTION - Allow adequate room
around you during game play. Stay
at least 3 feet away from the TV. As you
move around during gameplay, make
sure objects and other people are out of
your range of movement or arm motion
to prevent damage or injury.
CBX II - 382-390 Midsummer Blvd.,
Milton Keynes, Buckinghamshire MK9 2RG UK
MC
pour Wii
MD
MC
MD
MC
:
MC
doit être synchronisée avec la
MD
Werbung
