General Functions - SBS Invisible Ghost Bedienungsanleitung

UK
INTRODUCTION
Thank you for choosing the Bluetooth® headset SBS. This
manual will help you get the most out of your headset.
The figure shows the right wearing position, with Multi
Function Button up.
PAIRING
To pair your headset with your phone, press and hold the
multifunction button for 5 to 8 seconds, until the LED indicator
flashes red and blue.
The headset automatically pairs with the last phone it paired
with. But if you're connecting for the first time, you should
activate Bluetooth on your phone and select BT220 from the
list of available devices.
CHARGING
The LED indicator will flash red when the battery level is
low. You will also head a voice message from the headset. To
recharge, open the protective cover of the micro-USB socket
and connect it to a power source using the cable provided.
When the headset is fully charged, the LED indicator will
change from red to blue. .

GENERAL FUNCTIONS

Power on: press and hold the multifunction button for 3
seconds. The LED indicator will briefly turn blue.
Power off: press and hold the multifunction button for 4
seconds. The LED indicator will briefly turn red.
Answer a call: The LED indicator flashes blue to indicate that
a call is incoming. To answer the call, press the multifunction
button.
End a call: press the multifunction button once.
Redial last number: with the headset in standby mode, press
the multifunction button twice.
Reject a call: when you see an incoming call signalled by the
4