Sony DVCAM DSBK-130 Bedienungsanleitung Seite 10

Overview
The DSBK-130/130P Time Code Input/Output Board is an
option for the Sony DSR-85/85P/80/80P/60/60P or other
digital videocassette recorder/player (hereafter referred to as
"VCR"). When this option is fitted in the VCR, it becomes
possible to input and output an SMPTE- or EBU-format analog
time code (LTC) signal.
Only when the VCR equipped with this board is in normal-
speed playback mode, a time code signal (read from the tape
being played back) will be output from the VCR's time code
output connector. When the VCR is in any other mode, no
signal will be output from its time code output connector.
For the input and output signal specifications and connections,
refer to the Operating Instructions for the VCR.
If this option is installed incorrectly, personal injury or damage
to peripheral items may occur due to fire, shock, or other
accidental circumstances. To avoid such risks, installation
should be performed by qualified service personnel.
10
Note
Caution