Memory Function - nedis AIPU300CWT Kurzanleitung

Air quality indicator
Colour
Red
Yellow
Green
Blue
2
A
After 30 seconds, A
Change the brightness of A
Set timer
1. Press B
2. Press B
4 B
Time options: 2 hours, 4 hours, 8 hours.
3. To cancel the timer, restart the product.
Set auto mode
1. Press B
The sensor indicates the air quality and adjust the speed of the fan if necessary.
2. Press B
Set sleep mode
1. Press B
4
In sleep mode, the product operates as quiet as possible.
2. Press B

Memory function

•
The product remembers the latest settings when switched off.
•
The product resumes with these settings when switched back on.
PU300CWT_MAN_COMP_print_1019_(19593 1422) v01.indd 6
shows the air quality using colours.
3
changes colour based on the current air quality.
3
to set the timer.
3
to increase / decrease the time.
2
shows the selected time.
4
to select auto mode.
7 8
of B
to exit this mode.
7
to select sleep mode.
4 8
of B to exit this mode.
Air quality
Bad
Moderate
Good
Very good
3 3
by pressing A
6
using the palm of your hand.
2-10-2019 13:22:1