Commissioning And Operation; Cleaning And Care - Klarstein Speed Iron V2 Bedienungsanleitung

COMMISSIONING AND OPERATION

Steam ironing
1. Set the ironing temperature to the „COTTON-LINEN" position by turning the
temperature control knob. All fabrics can be ironed at this temperature.
2. Wait until the „Steam ready" indicator (9) lights up and wait until the „Heat up"
indicator goes out. Press the iron button (3) to continuously release steam through
the nozzles on the soleplate.
3. Press the „Short steam interval" button (12) to interrupt continuous steam delivery.
4. Press the „Short steam interval" button (12) for a short steam release. As soon as
you release the button, the steam release is interrupted.
Note: During the first use of the iron, some drops of water mixed with steam may
escape from the soleplate until the temperature and steam output stabilize. It is
recommended that the first steam shocks be directed at an old cloth until the steam
output has stabilized.
Filling the water tank
1. Switch the unit off with the ON/OFF key (2).
2. Press the continuous steam release button (3) to remove all water residues from the
pipes.
3. Place the iron on the bracket (5).
4. Disconnect the mains plug from the socket.
5. Fill the water tank.

CLEANING AND CARE

• Always unplug the appliance from the wall outlet before cleaning and servicing.
• In hard water areas, clean the water tank with a vinegar solution (75% water and
25% vinegar).
• Wipe the cabinet with a damp cloth. Do not use solvents or cleaning agents that
may damage the cabinet.
• We do not accept any liability for accidents which are related to improper use.
EN
13