Quax 55604 Serie Bedienungsanleitung Seite 17

Wall Changer 55604x
4. Attaching the wall changer
4.1
Place the L-support A in front of the provided openings on the bottom of the wall changer and fi x it
with the two wood screrws B.
4.2
Position the wall changer against the wall with the help of another person and mark the three holes
needed to attach the wall changer. (Two on the inner upper side and one on the outer bottom in the
L-support).
4.3
Drill the holes (8 mm dia.) in the wall and push the plugs C into the holes. Make sure the plugs are
adapted to the wall where you want to attach the wall changer.
4.4
Insert the longer screws D through the spacers E and through the two holes on the inside top of the
wall changer and screw them into the wall plugs C.
4.5
Insert the medium long screw F through the remaining spacer E and through the opening in the L-
support A and fi x it into the wall plug C.
4.6
Place the handle H in front of the provided openings on the swing door and secure it with the bolts G.
4.7
Check the stability of the wall changer before putting it into service. Make sure all screws are fully
tightened and the wall changer is properly secured to the wall.
Muur luierkonsole Console à langer murale
Wand Wickelkonsole
Wall changer
Quax Quax
First dreams First dreams
® ®
First steps First steps
17