Standard Specification - PIAB 0110358 Betriebsanleitung

VACUUM SWITCH

STANDARD SPECIFICATION

Description
Rated pressure range
Maximum pressure
Media
Operating temp./Compensated temp. range
Storage temperature
Operating humidity
Supply voltage
Current consumption
Display
Setting accuracy
Hysteresis
Switching capacity
Respons
Net weight
Material
Material
Material
PIPING
1. When using UNIVERSAL JOINT TYPE:
Use a wrench on the hexagon part of the port section to tighten to a torque
of 1.0Nm or less.
2. When using an ALUMINIUM BLOCK with a through-hole of M5, hold the
port section of the body and tighten the fitting in use.
Do not hold the main body when tightening. Also, do not use a
wrench on the main body when piping. Such handling may cause
breakage of the product
4
+/–3%F.S max. (0–50°C : Reference temp. 25°C)
2 sealing screws
Base
Case
0110358
-100~300 kPa
600 kPa
Non-corrosive gases
-10~60°C/0~50°C
-20~70°C
(Atmospheric pressure, humidity 65%RH max)
35–85%RH (No condensation)
10.8–30V DC (including ripple percentage)
20mA max. (When switch is OFF)
Red LED (When switch is ON)
+/–2% F.S.max.
80mA Max (30V DC)
Approx. 1ms
27 g
Brass Nickel
Aluminium
Polycarbonate
0110359