Warranty - PIAB 0110358 Betriebsanleitung

VACUUM SWITCH
For stability, use a regulated DC power supply. Surge-absorbing circuits
(diodes, varistors, etc.) are necessary if inductive loads such as relays
and solenoids are connected to the same power line as the product. If
using a DC power supply unit such as a switching power supply, the FG
terminal should be earthed.(See the figure below.)
Use PH neutral detergents to clean the body. Do not use lacquer thinner
and other solvents for cleaning.

WARRANTY

This product is covered by a warranty for a period of one year from the date of
delivery. This warranty covers free-of-charge repair and replacement for defects
occurring through the design or manufacturing inadequacy. Even during the
warranty period, the following failures will be handled on a fee basis.
1. Failures or damages caused by improper use or misoperation performed not
following the instruction manual.
2. Failures or damages caused by improper modification, adjustment or repair.
3. Failures or damages caused by natural calamities, fires or other inevitable ac-
cidents.
MODEL NUMBERS
Art. No.
0110358
0110359
( ) Compliance with EMC standards.
Description
Vacuum switch PNP NC M5
Vacuum switch NPN NC M5
3