WALL MOUNT ARM FOR FLAT SCREEN
WALL MOUNT ARM FOR FLAT SCREEN
Before putting this product into operation, please read carefully all the instructions, even
Before putting this product into operation, please read carefully all the instructions, even
if you are already familiar with using similar products. Use the product only as described
if you are already familiar with using similar products. Use the product only as described
in this manual. Keep this manual in case you need it for future reference.
in this manual. Keep this manual in case you need it for future reference.
EN
EN
The electronic version of this user manual can be downloaded on the website
The electronic version of this user manual can be downloaded on the website
www.connectit-europe.com.
www.connectit-europe.com.
We recommend keeping the original packaging of the product, invoice and warranty
We recommend keeping the original packaging of the product, invoice and warranty
certifi cate at least for the time the warranty is valid. When shipping the product, we rec-
certifi cate at least for the time the warranty is valid. When shipping the product, we rec-
ommend using the original packacking that the product was delivered in that will provide
ommend using the original packacking that the product was delivered in that will provide
the best protection for it from being damaged during transport.
the best protection for it from being damaged during transport.
1
1
Warning
Warning
The wall or the surface used for securing the arm must have suffi cient strength and
The wall or the surface used for securing the arm must have suffi cient strength and
maximum load to secure the weight of the arm, the screen and other accessories.
maximum load to secure the weight of the arm, the screen and other accessories.
When installing the screen, use an assistance of another person.
When installing the screen, use an assistance of another person.
During the installation, tighten the screws properly, but make sure not to strip the
During the installation, tighten the screws properly, but make sure not to strip the
threads. That could damage the installed screen or signifi cantly decrease the maximum
threads. That could damage the installed screen or signifi cantly decrease the maximum
load of the arm.
load of the arm.
This wall mount arm is designed for indoor use only. Outdoor use may cause harm,
This wall mount arm is designed for indoor use only. Outdoor use may cause harm,
damage to the arm or the installed screen.
damage to the arm or the installed screen.
Check the stability and safety of the mount at least every three months.
Check the stability and safety of the mount at least every three months.
2
2
Speci cations
Speci cations
Quick and easy assembly
Quick and easy assembly
Screws and concrete anchors included
Screws and concrete anchors included
With cable management
With cable management
Full-motion wall mount
Full-motion wall mount
Fits most 13"-27" fl at panels
Fits most 13"-27" fl at panels
VESA 75×75, 100×100 compliant
VESA 75×75, 100×100 compliant
+15°/-15° continuous adjustable tilt
+15°/-15° continuous adjustable tilt
Swivel 360°
Swivel 360°
Extend from 8.8 cm
Extend from 8.8 cm
Max. load capacity: 15 kg
Max. load capacity: 15 kg
Color: black
Color: black
CI 783
CI 783
USER MANUAL
USER MANUAL