Troubleshooting - ION Air LP Schnellstartanleitung

Air LP Speaker Features
1. Power/Volume/Bluetooth
Knob – The Air LP Speaker can be
powered on or off by pressing and
releasing the Power/Volume knob. To
disconnect pairing, press and hold the
Volume knob on Air LP Speaker for two
seconds.
2. Power/Volume Knob
Power/Volume Knob LED ring will be lit
solid red when it is powered on and in
pairing mode. The LED ring will be lit
solid blue when it is connected to a
Bluetooth device.
3. Power Jack – Connect the included 9V DC, 2A power supply here to power the Air LP Speaker.
4. Aux Input – Connect a CD player, MP3 player, or other audio source to this stereo 3.5 mm (1/8") input.
Using Air LP Speaker with Other Bluetooth Devices
1. Power on your Bluetooth device (smartphone, tablet, etc.).
2. Power on the Air LP Speaker by pressing and releasing the Power/Volume knob.
3. The Power/Volume knob LED ring will be solid red showing it is powered on and in pairing mode.
4. Go to your device's Bluetooth settings, find Air LP Speaker, and connect.
5. Once your device is connected to the Air LP Speaker, the Bluetooth LED ring on the Air LP Speaker will
be solid blue.
6. Play music on your Bluetooth device.
7. Adjust the volume knob on the Air LP Speaker by rotating the knob.
8. To disconnect pairing, press and hold the Volume knob on Air LP Speaker for two seconds. The LED ring
will return to red. Alternately, you can turn off Bluetooth on your Bluetooth device or select "Disconnect"
from your Bluetooth device's settings menu.
9. To connect to another Bluetooth device, repeat steps to pair.

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source. Also, try to reduce the
overall volume of Air LP Speaker.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass
level. This will allow you to play the music louder before clipping (distortion) occurs.
Disconnect
LED – The
1
3
9V
3
2
4
2A AUX IN
AIR LP SPEAKER