Werbung
2. Raincoat
The built-in raincoat is at the bottom of the backpack.
NOTE: The controller has passed the standard IPX4 water splash environmental
test. Use the built-in water-resistant raincoat to protect your backpack from rain.
3. Y cable
If your powerbank has only one output port, the Y cable helps you to charge
your device and light up backpack at the same time.
1.
Connect the built- in USB Type-A cable (a) to Y cable -Type-A cable (b).
2.
Connect the Type-A cable
3.
Connect the Type-A cable
NOTE: The output voltage of the USB 2.0 USB Type-A Cable is 5V / 3A. Fast
charging function depends on your device and power source.
WARNING:
•
DO NOT remove the non-detachable controller and cable from your
backpack.
•
This product should only be used in environment with ambient
temperatures between -10°C (14°F) and 45°C (113°F).
•
The LED module may become warm while in use. DO NOT disconnect your
LED module as this may result in an electric shock or malfunction
6
to your powerbank.
(c)
to the cable of your device.
(d)
A a
A a
b
c
b
c
d
d
inside
NOTE: You can directly charge your
device without opening the main
compartment of the backpack by
connecting the Type-A cable (d) to
your device cable through a cable
management hole.
A a
b
c
A a
d
b
c
d
Werbung
