Werbung
Set up your own profile
Function introduction
Aura RGB Ambient Sensor On/Off:
A A
Tap once to enable brightness adjustment based on the ambient
B
conditions, and tap again to enable constant brightness.
C
A A
D
Aura RGB Exterior Color:
B
Press repeatedly to cycle through the following 8 striking colors:
C
D
(1) red (2) orange (3) yellow (4) green (5) blue (6) indigo (7) purple (8) pink
NOTE: This feature is only available on the following Aura RGB effects - (2)
breathing (6) strobing (7) static.
A A
B
Aura RGB Exterior Lighting On/Off:
C
Press repeatedly to cycle between present 7 effects, or power the Aura
D
RGB LEDs on or off.
(1) rainbow (2) breathing (3) color cycle (4) wave (5) glowing Yo-Yo (6)
A A
strobing (7) static
B
C
Internal Light Strip On/Off:
D
Tap to turn on/off the white LED strip inside the backpack.
Light up your backpack
1.
Connect your backpack to your powerbank
to light up the Aura RGB exterior lighting.
The Internal Light Strip (D) will light up for 2
seconds as an indicator.
2.
Use the built-in controller to control the Aura RGB lighting effect. After
toggling (A), the Aura RGB ambient sensor will react to the ambient lighting
conditions automatically.
NOTES:
•
The Internal Light Strip (D) may terminate automatically when you turn off
Aura RGB Exterior Lighting (C).
•
Disconnect your powerbank from the USB cable after turning off lighting (C).
•
The powerbank is purchased separately.
4
A A
B
C
D
A A
B
C
D
Sensor
powerbank
pocket
A A
B
C
D
A A
B
C
D
Werbung
