Cleaning And Care; Disposal - OWIM Z31427 Bedienungs- Und Sicherheitshinweise

Place the patch over the hole and press
5
down firmly. If necessary, place a heavy object
on the repair patch .
5
Wait 24 hours before inflating the product
again.

Cleaning and Care

Only use care product without any acid or
petrol, never use silicone based products.
Thoroughly clean your dinghy after every use,
rinsing it with clean water and mild soap to
remove any salt crystals, grains of sand and
other fine particles. Then allow to dry completely.
Be sure the product is completely dry inside
and outside before storing it for extended peri-
ods. Otherwise mould and mildew may grow.
Store the product in a dark and dry location –
out of reach of children.
The ideal storage temperature is between
10°C and 20°C.
Be sure the air valves
14
valve are closed when storing the product
12
for extended periods.

Disposal

The packaging is made from eco-
friendly materials. Dispose of packaging
through municipal recycling containers.
Contact your local refuse disposal authority for
more details on how to dispose of your worn-out
product.
, and the screw-on
15
GB 9