Operation - Sundirect TH600-PRO Installations- Und Bedienungsanleitung

4. Operation:

4.1 General introduction of the smart control
The TH600-PRO has an integrated WiFi touchscreen control box, meaning there is no other
additional thermostat needed to control the heater. The panel can either be controlled manually
using the manual control touchscreen on the right bottom of the glass surface or can be operated
via smartphone. Once the heater has been connected to the App, the App will take over control
together with the control box. In case your home internet network is not working, it is still possible
to operate the heater via touchscreen, just power off the heater and power on again after a few
seconds, once the heater is reconnected to the WiFi, the heater will reconnect to the smartphone
automatically.
4.2 Touchscreen description
1. Power switch
2. Screen
3. "+" button
4. "-" button
5. Timer
6. Wi-Fi indicator
4.3 Manual control
Activate the Power switch, the screen will show the current room temperature reading, adjust your
desired room temperature by pressing the "-" or "+" button.
To set up the timer manually, you can press the Timer button, and the screen will show "1H"-
meaning the heater will operate on the countdown timer and will power off after 1 hour. Press again
to shift to "2H", then "3H" and so on (up to 24 hours).
Long press the "+" button for 3 seconds to turn on/off the heater via touchscreen.