nedis AIPU200CWT Kurzanleitung Seite 6

The sensor indicates the air quality and adjust the speed of the fan if necessary.
q
2. Press B or B
Set sleep mode
r
1. Press B
to select sleep mode.
4
In sleep mode, the product operates as quiet as possible.
r
2. Press B or B
Set timer
e
1. Press B
to set the timer.
e
2. Press B
to increase / decrease the time.
5
4
B shows the selected time.
Time options: 2 hours, 4 hours, 8 hours.
3. To cancel the timer, restart the product.
Set anion mode
w
1. Press B
to select anion mode.
4
The product releases millions of anions per second.
w
2. Press B or B
Set Air Quality mode
q
1. Press B
to select Air Quality mode.
1
A shows the air quality using colours.
Colour
Red
Yellow
Blue
Troubleshooting
Problem
The product does
not switch on.
y
to exit this mode.
y
to exit this mode.
y
to exit this mode.
Solution
Connect to a power outlet.
Check if the power cord is damaged.
Make sure A
Air quality
Bad
Fair
Good
4
is closed.
6