Denon Professional CONVOY Benutzerhandbuch Seite 8

Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Turn on Convoy using the power switch.
3. Press the Bluetooth button on the Convoy to pair it with a Bluetooth device.
4. Navigate to your Bluetooth device's setup screen, find Convoy and connect. The
Bluetooth LED will light up solid when it is "paired".
Note: If your device requires a passcode or PIN, enter 0000.
5. If your Bluetooth device is not able to connect to Convoy, press the Bluetooth button on
Convoy to break previous Bluetooth connections and reset the Bluetooth module.
6. Start playback from your Bluetooth device.
7. To disconnect a connected Bluetooth device and connect to another Bluetooth device,
press the Bluetooth button. Repeat Step 3.
Note: If you experience trouble connecting or playing music, update your device's OS.
Pairing a Bluetooth Device Using NFC
NFC (near-field communication) allows data exchange from devices, such as pairing, by gently
bumping them together. Check in your device's manual to see if this feature is supported.
To use NFC to pair with Convoy:
1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device's Settings menu and check that NFC is turned On (one-time step).
3. Power on Convoy.
4. Touch and briefly hold your device to the NFC logo located on Convoy's top panel.
5. Follow the pairing instructions that appear on your phone. If a passcode is required, enter
"0000".
6. To unpair, gently bump your device against the NFC logo.
Using the Aux Input
Connect your smartphone, MP3 player, or similar device to the Aux Input. Adjust the output
volume on your source device and then adjust the overall volume using the Aux Input Volume
Control on Convoy.
8