Quick Start Guide - nedis VMAT3464AT Kurzanleitung

a

Quick start guide

HDMI Splitter
For more information see the extended manual
online: ned.is/vmat3464at
Intended use
The Nedis VMAT3464AT is a true 1080p 4x4 HDMI matrix switch.
This product is intended to connect up to 4 HDMI inputs with up to
4 HDMI outputs and switch between them.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
1
HDMI Splitter
2
Power adapter
Front panel (image B)
1
Remote control sensor
2
HDMI input indicator LEDs
for HDMI output A
3
HDMI input indicator LEDs
for HDMI output B
4
HDMI input indicator LEDs
for HDMI output C
5
HDMI input indicator LEDs
for HDMI output D
6
Power switch
Rear panel (image C)
1
Power supply port
2
HDMI outputs (A-D)
3
HDMI inputs (1-4)
Remote control (image D)
1
Power button
2
Select HDMI input buttons
for HDMI output A
3
Select HDMI input buttons
for HDMI output B
4
Select HDMI input buttons
for HDMI output C
Safety instructions
WARNING
-
•
Do not use a damaged product.
•
Only use the product as described in this manual.
• Do not expose the product to direct sunlight, naked flames or
heat.
VMAT3464AT
3
Infrared extender
4
Remote control
7
Select button, to switch
HDMI input (1-4) to HDMI
output A
8
Select button, to switch
HDMI input (1-4) to HDMI
output B
9
Select button, to switch
HDMI input (1-4) to HDMI
output C
10
Select button, to switch
HDMI input (1-4) to HDMI
output D
4
Infrared extender port
5
RS-232 communication port
5
Select HDMI input buttons
for HDMI output D
6
Auto button
7
Off button A
8
Off button B
9
Off button C
10
Off button D
•
Do not expose the product to water or moisture.
• Place the product on a stable and flat surface.
•
Do not drop the product and avoid bumping.
•
Do not open the product.
• Keep the product out of reach from children.
Installation
Connection diagram (image E)
• Connect HDMI input devices E
using a HDMI cable. A HDMI input device can be for example a
DVD player, a set top box or a game console.
• Connect the HDMI output devices E
1
C using a HDMI cable.
• Connect a RS-232 Equipped PC or Notebook E
5
port C .
• Connect the power supply port C
the supplied DC 5 V, 2 A power adapter A
Using the HDMI Splitter
Press the HDMI input buttons D
each HDMI output (A-D).
Specifications
Product
Article number
Dimensions (l x w x h)
Supported HDMI resolution
Max bandwidth per channel
Max baud rate per display
Input / Output DDC signal
Operating temperature
Humidity
Power supply
Warranty
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product
VMAT3464AT from our brand Nedis
tested according to all relevant CE standards and regulations and
that all tests have been passed successfully. This includes, but is not
limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet
if applicable) can be found and downloaded via
webshop.nedis.com/VMAT3464AT#support
For additional information regarding the compliance, contact the
customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands
5
1 2
to the HDMI inputs C
2
to the HDMI outputs
3
to the RS-232
3
to a power outlet using
3
.
2345
to select the input for
HDMI Splitter
VMAT3464AT
441 x 202 x 45 mm
4K @ 30 Hz
1080p / 720p / 576p / 480p
225 MHz
2.25 Gbps
5 V p-p (TTL)
0 - 45 °C
10 - 85% RH (no condensation)
5 VDC / 4 A
1 year
, produced in China, has been
®