On/Off - Cartrend MS-338A Bedienungsanleitung

CAR POLISHER
• Make sure the polishing bonnet is free of any debris.
• Spread a teaspoonful of polishing wax over the cloth
polishing bonnet (6) (fig. 2).
• Apply the polishing compound evenly across the waxed
surface of the cloth polishing bonnet (6). Do not apply
too much compound (fig. ).
• Do not apply the wax or the polishing compound directly
to the vehicle.

On/Off

Attention!
Place the polishing disc (4) on the surface to
be polished and hold the appliance before
switching on with both hands (fig. 4).
• Press power button (1) to switch on the polisher.
• Press power button (1) again to switch off.
Polishing
• Place the power cord (5) over your shoulder (fig. 5).
• Move the polisher steadily in broad, sweeping strokes
in a criss-cross pattern over the surface to be polished
(fig. 5). Do not press down on the polisher.
• Polish the complete vehicle from the front to the back
and each side separately.
• To polish the sides, hold the polisher as shown in figure
6. Use broad sweeping strokes in a criss-cross pattern.
1
GB
Fig. 2
Fig. 
Fig. 4
Fig. 5
Fig. 6