Personal Safety Instructions; Intended Use - Sauer 80150900 Bedienungsanleitung

WWW.TOOL-IS.COM

Personal Safety Instructions:

When working with Sauer tools, you must always carry protective equipment
in the form of protective gloves, safety goggles and safety shoes that meet the
current safety standards. Protect your eyes from any hurled particles, your
hands from abrasions and bruises, and your feet from falling parts.
Before use, check the tool for damage, deformation, cracks, worn threads or
other defects. Damaged or worn components must be replaced before use!
When working with traction and pressure spindles, there is a risk of breakage
resulting in components being hurled around. This can lead to the most serious
of injuries. Therefore, never position yourself in the direction of the traction or
compression and observe the instructions in the "Safety instructions" section.
• The cylinder may only be operated by qualified personnel.
• Always provide a power reserve of 25% or more during lifting.
• Do not overload the cylinder
• Pay attention to good positioning of the cylinder to the load. Anchor surfaces
must be load-bearing, stable and parallel.

Intended use:

This tool kit is used for the hydraulic drive of other Sauer tool sets. The tool may
only be used for this work. Any other use may result in injury.
9