Set Contents - Sauer 80150900 Bedienungsanleitung

Set contents:

Art. No. Quantity Designation
80 2 10000
80 2 20046
Instructions for use:
• Check that the hydraulic couplings have been connected completely and
correctly. Considerable material damage and injuries to persons can occur
if there is pressure transmission due to incorrect or incomplete connec-
tion of the couplings.
• Screw the cylinder to the hose end provided for this purpose.
• Vent cylinder and hose completely before operational startup. For this pur-
pose drive the cylinder repeatedly completely in and out. If possible hold the
coupling up and the pump in a higher position than the cylinder.
• The pump tank must have enough usable volume to drive out the connec-
ted cylinder completely. Refill with oil as necessary (Attention: refill only with
retracted piston).
• Avoiding severe shocks and temperatures above 80 ° C.
• Do not use damaged cylinders.
• Do not weld, drill, or otherwise change the cylinder.
1 Sauer Hydraulic Cylinder, 20 t.
1 Adapter for Pressure Pieces
WWW.TOOL-IS.COM
11