Care and storage:
•
After use, clean the tools with a clean cloth. The components are galva-
nized and do not need any additional treatment. Components with damage
to the galvanization (e.g. the slide hammer) can be oiled lightly.
•
After use, place the tools back into their foam pads. This will allow you to
relocate everything quickly and see whether any components are missing.
Otherwise, keep the tools in a dry, clean place.
Maintenance:
•
The repair of cylinders may be implemented out by specialized and authorized
personnel.
•
Oil changes should be implemented at least once annually.
•
Use only the hydraulic oil specified by ISO VG 32.
Disposal:
•
Dispose of the tool and packaging material according to legal require-
ments.
•
It is prohibited to mix used oils with other waste.
12