Herunterladen Inhalt Inhalt Diese Seite drucken

Package Contents; Product Dimensions; Technical Specifications; Installation Guide - Bose DesignMax DM10S-SUB Installationsanleitung

Surface-mount subwoofer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 17
PRO.BOSE.COM

Package Contents

× 1

Product Dimensions

502 mm
19.78 in

Technical Specifications

For additional specifications, see the DesignMax DM10S-SUB
technical data sheet at PRO.BOSE.COM.
Physical
Product Dimensions
Net Weight, Loudspeaker with
grille and bracket
Shipping Weight
Installation Guide • DM10S-SUB
345 mm
13.60 in
323 mm
12.70 in
Height: 502 mm (19.78 in)
Width: 316 mm (12.45 in)
Depth: 323 mm (12.70 in)
16.10 kg (35.5 lb)
18.82 kg (41.5 lb)
× 1
316 mm
12.45 in

Important Installation Information

This product is intended for indoor use only.
It is the installer's responsibility to ensure installation of the loudspeakers
and mounting system is performed in accordance with all applicable
codes, including local building codes and regulations. Consult the local
authority having jurisdiction before installing this product.
It is the responsibility of the installer to ensure the safety of the
loudspeaker installation. Failure to properly install the loudspeaker could
result in damage, injury, or death.
Do not mount the product in locations where it may be exposed to
water or condensation.
Do not mount the product in locations where condensation may occur.
This product is not intended for installation or use in indoor water
facility areas (including, without limitation, indoor pools, indoor water
parks, hot tub rooms, saunas, steam rooms and indoor skating rinks).
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produces heat.
The hardware for securing the loudspeaker to the mounting surface is
not supplied. Consult a building professional for the proper mounting
hardware before installing the loudspeaker.
Do not mount on surfaces that are not sturdy, or that have hazards
concealed behind them, such as electrical wiring or plumbing. If you are
not sure about installing the bracket, contact a qualified professional
installer. Ensure the bracket is installed according to local building codes.
× 2
Ø 6.7 mm
280 mm
0.26 in
11.00 in
465 mm
18.32 in
Overview
× 2
218 mm
8.58 in
English • 3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis