Ramon Soler Soltronic AC & DC INTERGRATIVE AUTOMATIC Installationsanleitung Seite 3

INSTALLATION DRAWINGS
Adaptor
TROUBLE SHOOTING
FAULT
Fault low water flow
No water
REMARKS
1. The tap should be firmly fixed. Any play may cause malfuction.
2. The distance between the sensor eye and the bottom of the basin should be less than 50 cm.
3. One should remove all foreign objects lying in front of the sensor eye after installation. Photogra
phic material should be stored or kept out of the sensor's range, so as not to incur in unwanted tap
operation by accidental discharges.
Sensor windows
L = 800 PVC pipe
Signal Output
(black)
DC input
(red)
Attention: Connect RED to RED, and BLACK to BLACK
CAUSE
1. Debris in the valve
2. Eyet in the valve is jammed
1. No DC supply
2. No AC supply when whing adapter
3. Water source turned off
Signal input
(black)
DC Output
(red)
1. Close the water via the triangle valve is
the font inver tube, ther clear debris out
1. Change new batteries
2. Check the power wide box and wait the
supply to return
3. Turn on the water adjustment screw
2
ENGLISH
Connect with Output
Connect with inlet (G 1/2)
ACTION