Inhaltsverzeichnis; Introduction; Safety; Product Description - Husqvarna HP100-1 Bedienungsanweisung

Introduction..................................................................... 4
Safety..............................................................................4
Assembly........................................................................ 5
Operation........................................................................ 5

Product description

The models HP100-1, HP200-1 are hearing protection
with headband and the models HP100-2, HP200-2 are
hearing protection for a helmet. The products are made
as a protection against harmful noise.
Compliance and approvals
The products meet the Essential Health and Safety
Requirements as laid out in Annex II and conforms with
Safety definitions
The definitions below give the level of severity for each
signal word.
WARNING: Injury to persons.
CAUTION: Damage to the product.
Note: This information makes the product easier to use.
General safety
WARNING: Read the warning instructions
that follow before you use the product.
• Use and save these instructions.
• For optimal fit and function, make sure that you have
selected the correct product for your use.
• Do not change or remove parts on the product. Only
do changes that are given in this operator's manual.
• The noise attenuation of the product will be severely
impaired if you do not follow the instructions in this
operator's manual. Earmuffs, and in particular
cushions, may deteriorate with use and should be
examined at frequent intervals for cracking and
leakage, for example.
4
Contents
Maintenance................................................................... 5
Transportation, storage and disposal............................. 5
Technical data................................................................ 6
Accessories.................................................................... 7

Introduction

quality assurance of the production process, module D,
laid out in Annex VIII of the PPE-regulation (EU)
2016/425. CE markings are in accordance with EN
352-1:2002 and EN 352-3:2002. The products are
approved to modules B and D by BSI (NB 2797), BSI
Group The Netherlands B.V. Say Building, John M.
Keynesplein 9, 1066 EP Amsterdam, The Netherlands.
The full text of the EU declaration of conformity is
available at the following Internet address:
www.husqvarna.com. Search for the product.

Safety

• This product may be adversely affected by certain
chemical substances. Further information should be
sought from the manufacturer. Keep away from
aggressive substances and clean the product
regularly. Use a cloth with water and soap. Do not
wash or put fully into water.
• Only use Husqvarna original spare parts.
• Never use the earmuffs longer than 10 years from
the manufacturing date stated on the packaging.
Safety instructions for operation
• The wearer should ensure that the earmuffs are
worn at all times in noisy environments.
• Be more careful and listen for warning signals when
you use the product. The noise from warning signals
can be decreased when you use the product.
• Make sure that the product is not hit during
transportation and use.
• Only use the product between temperatures -20°C
and +55°C. If you use the product in other
temperatures, this can cause damage to the
mechanical parts.
• Make sure that you know how to use the product
before use.
• The fitting of hygiene covers to the cushions, may
affect the acoustic performance of the earmuffs.
Always use original accessories.
• Do not push the earmuffs against the helmet shell. If
you do that, it can cause cracks around the side of
the helmet.
(Fig. 5)
1138 - 003 - 12.06.2019