Fakir trend BL 141 Bedienungsanleitung Seite 43

Fault
Appliance does not work. Plug is not inserted or
Vacuum cleaning is
unsatisfactory.
Troubleshooting
Possible cause
the appliance is not swit-
ched on.
Power outlet does not
carry any power.
Power cord is damaged.
Dust cup is full.
Filter is dirty or clogged.
Nozzle, telescopic
suction tube or suction
hose are clogged up.
Suction regulator is
open.
The attached nozzle
does not fit the flooring.
The "carpet/hard floor"
switch is in the wrong
position for the particular
type of floor.
Sucked-in particles have
become jammed.
Solution
Insert the plug into a
mains socket and switch
on the appliance.
Test the appliance at
another socket which
you are sure carries
current.
Have the power cord re-
placed by an authorised
Fakir service centre.
Empty dust cup.
Clean or change the
corresponding filter.
Eliminate clogging. If ne-
cessary, use a wooden
stick (e.g. a broomstick)
to do this.
Close suction regulator.
Attach the correct nozz-
le.
Set the "carpet/hard
floor" switch to the cor-
rect position for the type
of floor.
Remove particles. If
necessary, use a long
wooden stick (e.g. a
broomstick).
43