Herunterladen Inhalt Inhalt Diese Seite drucken

Whispbar K948W Montageanleitung Seite 9

Basisträgersystem
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
EN
Fitting Kit
K948W
Refit locking screw so that it goes through
the hole in the clamp. Do not begin to
tighten the locking screw.
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
Tighten adjusting screw to 2 Nm (1.5 ft lb)
hand tight.
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis