Technical Data; Installation And Operation; Safety Instructions - CombiSteel 7518.0005 Gebrauchsanweisung

4. Technical data

Name
Article no
Construction
Material used for casing
Voltage, frequency
Power
Temperature range
Capacity
Dimensions (mm)
Weight
We reserve the right to make technical changes!

5. Installation and operation

5.1 Safety instructions

WARNING! Electrical hazard!
The device must only be connected to a properly installed single socket with protective contact.
Never yank cord to disconnect from outlet. Cable must not touch any hot parts.

See that the cable does not touch any heat sources or sharp edges. Do not let the cable dangle over the
counter edge.
WARNING! Hot external surface!
During operation some parts of the device become very hot. In order to avoid injuries do not touch
any hot parts!

Do not use the device in case it does not function properly, has been damaged or dropped.

Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can
be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty
expires.

Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep away the cable from
operating range and do not dunk it into water.

Do not move or tilt the device when in operation.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation! Before installation the local power grid
specification should be compared with that of the device (see type label). Connect the device only
in case of compliance! Take note of the security advice!
7518.0005
1 door
With adjustable shelf
800W
45-60 plates,
max. Ø 320 mm
Width 450
Depth 485
Height 850
N.W.: 25.5kg / G.W.: 27.5kg
www.combisteel.com
Hot cupboard
7518.0010
2 doors
Stainless steel
230 V ~ 50 Hz
1200W
30°C - 85°C
90-120 plates,
max. Ø 320 mm
Width 750
Depth 485
Height 850
N.W.: 36kg / G.W.: 38.5kg
7