Intended Use; Transport, Packaging And Storage; Delivery Check; Packaging - CombiSteel 7518.0005 Gebrauchsanweisung

CAUTION!

The unit is not intended for use by individuals (including children) with physical or mental
disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under
the care of a person responsible for their safety or have received instructions regarding appropriate
use of the unit.

Children should be observed to ensure that they are not playing with the unit.

Preserve this manual safely. When passing on/selling the device to a third party, the manuals must
be handed over along with the device.

Every person using the device must act in accordance to the manuals and under consideration of
the safety advice.

The device is to be used indoors only.

2.3 Intended use

Safe operation is only guaranteed when using the device for its intended purpose.
Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service
only. The hot cupboard is intended only for heating and maintaining plates at the temperature selected.
CAUTION!
Any use going beyond the intended purpose and/or any different use of the device is forbidden and
is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a consequence of experiencing
damages resulting from unconventional use are impossible. The operator is liable for all damages resulting
from inappropriate use.

3. Transport, packaging and storage

3.1 Delivery check

Please check the delivery upon completeness and transport damage immediately after receipt.
In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage
on the carrier's bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after
notice, as claims for damages can only be asserted within the effective period for complaints.

3.2 Packaging

Please do not throw away the covering carton of your device as it might be useful for storage purposes, when
moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing
material should be removed completely from the device before installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in your country. Supply
re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please contact our customer service
center immediately.

3.3 Storage

Keep the package closed until installation and under consideration of the outside indicated positioning- and
storage markings. Packages should be stored under consideration of the following:

Do not store outdoors.

Keep it dry and dust-free.

Do not expose it to aggressive media.

Do not expose it to direct sunlight.

Avoid mechanical shocks and vibration.

In case of longer storage (> 3 months) make sure you check the state of the packaging and the parts
regularly. If required refresh or renew.
www.combisteel.com
6