Accessories And Replacement Parts - Beurer BARBERS CORNER HR 8000 Gebrauchsanweisung

Cleaning the shaver heads under running water
To clean the shaver heads very thoroughly, you can also rinse
them under running water. How to do this:
1. Pull the shaver unit upwards to
remove it from the device.
2. Push the shaver unit release
button.
The shaver heads open.
3. Hold the shaver heads under
running water
so that the jet of water runs
through the shaver heads from
the inside out.
4. When the shaver unit is com-
pletely dry, reassemble it, fol-
lowing the above instructions
in reverse order.

10. Accessories and replacement parts

Accessories and replacement parts are available from the corre-
sponding service address (according to the service address list).
Please state the corresponding order number.
Designation
Shaver unit
Item number and/or order number
164.189
36