Printing - XYZprinting da Vinci Color AiO Bedienungsanleitung

Printing

First-time printing
Users are able to do a first print by following the steps below.
Calibration Z-offset
D1-1 D1-2
Transfer files to be printed via the computer software "XYZmaker"
Internet access is required for product registration and software login.
Connect the printer and computer with a USB cable and install the "XYZmaker" on the computer to transfer the files you want to
print.
The "XYZmaker" is compatible with 64 bit operating systems of Windows and Mac OS 10.10 10.11 and 10.12. You can install it by
using the included USB drive or downloading the installer from the official XYZprinting website. The user manual of the software
can also be downloaded from the official website.
For details, visit the official website: http://www.xyzprinting.com/
1. Connect the computer and printer and select da Vinci Color AiO.
2. Click on OPEN to select the model file to be printed from
the folder. You can adjust the object size, printing position
and angle once the file is loaded. To print color objects,
save the file to be printed in the obj format and load it in
the XYZmaker.
4. The Prepare function can convert a obj file to a .3cp file.
Once the file is edited and adjusted, click on Print to output
the object. The printing operation will start after the file is
sliced.
Load Filament Change Ink
B C
3. You can change related settings to the desired printing result
and effect.
Prepare the
Calibration
file and then
- Test Page
execute the
- Color Calibration
printing
- Ink Calibration
C A
P21 P21