General Data - Skoda TMB PS 026 Montage- Und Bedienungsanleitung

Important
The towing coupling is intended for linking the trailers of the overall weight up to
1200 kg (the limitation of the trailer weight shown in the Technical Certificate of
the vehicle must be observed).
The towing coupling is manufactured according to the approved documentation,
and it complies with the homologation e8* 94/20* 0054.

General data

The design of the towing coupling meets all Czech and international regulations. The
coupling has passed the strength tests in compliance with the European Directive
EC 94/20; the design is protected with the certificate of the registration of the Utility
Design No. 15848. The towing arm is fitted with a ball journal with a 50 mm diameter,
in compliance with ISO 3853.
Advice
For the fitting of the towing coupling (RO1V 0002) it is necessary to order additional
following parts in PROF SVAR:
- cover with frame and 2 pcs of ventilating covers
(for fastening the ventilating covers, plastic nuts are required. If the existing covers
suffer a damage during their removing, order them from the catalogue of spare parts).
- gluing seal ELCH Technik P1 80 ml (R)
- activator Primer P146 (S)
For cutting the hole in the bumper, use the following set:
- punching tool for the cover of the rear bumper and clips (Q) for fixing the
frame
Electrical installation is not delivery component and it must be ordered
separately.
Set of the towing coupling (RO1V 0002) includes (fig. 1)
Name of part
Complete beam with socket holder
Screw M10 x 35
Towing arm
Cover of the ball journal of the towing arm
Key to the lock of clamping lever
Cover of the clamping bush
Self-adhesive label "50 kg"
User's guide and installation instructions
40
TOWING COUPLING
VP61 1301
VP62 0401
Pieces Position
1 A
4 B
1 C
1 D
2 E
1 F
1 G