Herunterladen Inhalt Inhalt Diese Seite drucken

Front Panel; Rear Panel - VONYX CDJ450 Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
37. LOOP IN
Pressing this button sets the starting-point of the seamless loop and indicates on the display.
38. LOOP OUT
Pressing this button sets the end-point of the seamless loop and starts the loop. To finish the loop, press the button
once more.
39. PITCH
Pushing this button makes the adjustment of the potentiometer available.
40. PITCH BEND +
The pitch will rise when this button is pressed and held and return to the original value when released.
41. PITCH BEND -
The pitch will drop when this button is pressed and held and return to the original value when released.

FRONT PANEL

42. DISC TRAYS
Place your CD in here. Press EJECT button to open the tray.
43. MIC INPUT
Plug 1/4" microphone plug in here.
44. MIC VOLUME ADJUSTER
Use this knob to adjust the microphone volume.
45. CUE LEVEL CONTROL
Use this knob to adjust the cue volume.
46. HEADPHONE INPUT
Plug in headphones here.

REAR PANEL

47. AC CORD INPUT
Insert supplied power cord here.
48. POWER ON/OFF SWITCH
Flip the switch to either turn the device on or off.
49. XLR BALANCED MASTER OUTPUT
XLR stereo balanced output of the master signal for connecting with units with line level inputs.
50. MASTER AND REC OUTPUTS
Recording output REC: Stereo output (RCA) of the master signal for connecting and amplifier or other units with line
level inputs.
Master output: Unbalanced stereo output (RCA) of the master signal for connecting an amplifier or other units with line
level inputs.
51. INPUT SELECTOR SWITCH LINE / PHONO CHANNEL B
Switch the analog inputs between phono and line input.
52. ANALOG INPUT LINE / PHONO
Stereo inputs (RCA) for CH A and CH B for connecting analog units with line level outputs or turntables with magnetic
system.
53. INPUT SELECTOR SWITCH LINE / PHONO CHANNEL A
Switch the analog inputs between phono and line input.
54. USB PORT
USB port type B for connecting with computers.
55. GND
Grounding lug for turntable connection. Always use this connection (your turntable cable should have a grounding
wire).
56. DJ MIC
Plug XLR type microphone in here.
5

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis